HQ-TBJ60 Automatic glue labeling machine

HQ-TBJ60 Automatic glue labeling machine:

Automatic glue labeling machine is stained with resin glue to stick rod to stick the label, spin to the vacuum belt from the belt to the bottle is rolled to stick to complete the work. Product label location is unified and beautiful, low label cost, can achieve manpower saving. cut the cost. Provide the goal of efficiency. Suitable for medicine. foodstuff. daily chemical product. pesticide. Circular containers of fine chemicals. Function features: replace the benchmark. Small parts such as vacuum belt system can be quickly adjusted to meet the bottle of various specifications. Spiral rod into the bottle design, accurate positioning and low failure rate. Vacuum belt transfer label, the standard qualified rate can meet the requirements. Photoelectric detection bottle, no bottle without label. The speed of the variable motor can be adjusted freely. Can be operated alone, but also can connect with the consistent operation production line;

All the key parts of the whole machine are all imported products. All the parts are made of stainless steel and aluminum alloy, to meet the requirements of the manufacturer, the appearance is novel and beautiful.

HQ-TBJ60 paste labeling machine, easy to operate, only need to turn on the power supply, start button, the whole equipment to enter the production state, the product to stick the target, manual into the bottle (the front into the bottle), bottle, bottle, induction start signal, bid, suction, Labeling, in order to complete the whole production process. Precise, fast, is the characteristics of this product.

This machine uses vacuum suction label to stick the back of the label on the benchmark, smoothly paste the label on the bottle, using electric eye detection, no bottle without labeling;

Application:

1.All mechanical transmission, transmission parts were all closed immersion tank rotation sleek lightweight, less failure, little noise.

2.The motor load is low, the panel, made of stainless steel products dial plate conveyor belt, no rust, durable, clean and easy to maintain.

3.A separate operation, can also be designed to be connected to the disk operating production lines.

4.Small footprint, can be arbitrarily moved, resized workplace space.

5.The label generally applicable chemical, pharmaceutical, food and beverage industries close to the small size of round container.

6.The product according to customer demand for additions to the printing device.

1. Plate conveyor chain；    2.Feeder screw;     3.Vacuum drum;       4.Coating device;

5. Printing device;           6.Label box;         7.Roll conveyor belt;

The working process is as follows: Bottle enters through the feeder screw 2 from the plate conveying chain 1, and sent to the vacuum drum 3 according to a certain distance. Then the box leaves the drum to prepare for re-bidding. The drum with the label through the printing device 5, glue coating device 4, respectively on the label to print batch number, production date and so on and glue. As the drum continues to rotate, the label of the adhesive meets the bottles to be labeled from the screw. The vacuum hole on the drum is unloaded one by one through the valve, and the label loses the vacuum suction and the vacuum drum. With the

friction of vacuum drum, the label adheres to the surface of bottles. Finally, bottles enters the channel composed of the roll conveyor belt 7 and the sponge rubber liner, and the label is further smoothed and fastened.

Technical parameters: