You are here: Home » News » Auxiliary affairs » Use of magnetic gear pump in the filling machine industry

Use of magnetic gear pump in the filling machine industry

Views: 1000 Author: Sherry Publish Time: 2023-12-21 Origin: Engineer wrote

Inquire

Use of magnetic gear pump in the filling machine industry

The cream emulsion without particles, viscosity 5000 cps and below the sticky material, water liquid, such as lubricating oil, detergent, detergent, honey, etc., can be used, can not contain particles, especially metal particles, will wear gear. For materials with high viscosity, samples can be sent to the company for testing. For strong corrosion materials such as toilet washing detergent cleaning, 316L pump cannot be used, and corrosion resistant pump must be used. For high temperature materials, the company's gear pump can adapt to 0-120℃, which also thanks to the company's precision machining ability, precision size machining accuracy, advanced design ability, rich experience to ensure that the gear pump will not be stuck in the case of high temperature materials, materials below 80℃ can be used directly, 80℃ -120℃ material, need to report to the factory, the pump after high temperature test. For heating liquidity but cooling solidification material, need to ensure that the pump filling is hot, can put the pump in the machine design in the heating solution, insulation not done, the curing material will break the gear, like aromatic, chocolate, cooling oil and other materials can take the pump body placed in the heating solution or hot water tank. Because the magnetic gear pump material is completely packaged without leakage, so toxic, flammable and explosive materials can also be used, but flammable and explosive materials need to use explosion-proof motor.

Select the magnetic gear pump model according to the flow: select according to the single filling volume and the number of filling times per minute, such as 5L material each time, 10 times a minute, because the filling is intermittent, then the gear pump with a flow rate above 90L / minute can be selected. The pump body material for filling industry is preferred 316L, gear material PEEK, more wear and corrosion resistant. Drive can choose servo motor, brush motor, brushless motor, stepper motor, explosion-proof motor. Connectors according to the actual situation can be selected. Most of the pneumatic closed water nozzle in the outlet, and a few use the final motor reversal to achieve leakage prevention. For materials with large viscosity, it is better to use hopper, direct suction may not move, the hopper should be replenished in time, because in the middle of the viscosity of bad fluidity may form a hole, resulting in direct pumping into the air. Large viscosity can also choose a large flow of the square pump gear pump, the suction force is greater. Aduncertain viscosity to send the material to the company for free testing.

Motor selection of magnetic gear pump: gear pump drive according to the need can choose servo motor, brush motor, brushless motor, stepper motor, explosion-proof motor. Why with different motors, the flow rate will be different? This is because there are brush motor 6000 rpm, brushless motor 4500 rpm, servo motor 3000 rpm, step motor 1000 rpm, different speed so different flow. For the selection of motor, according to their practical accuracy requirements and economy, high cost effective choose brush motor, brush motor is cheap, but only one percent, brush motor can only match governor, can not use PLC control; long life, choose brushless motor; small flow, large torque, accuracy five thousand, select step motor; precision within three thousand, wide speed range, select servo motor, servo motor except expensive, other are good. Brushless, stepping and servo motor can be controlled by PLC. Choose brushless motor, need 485 communication, the factory can be with communication motor, including drive, standard line 1.4 meters, can match 3 meters long line, the factory use is the TST 42-40P column of integrated motor products, integrated motor is the perfect combination of drive and stepping motor, it is a perfect fusion of stepping motor and drive technology, not only can save installation space, the wiring complex for simple at the same time. Using servo motor, the factory standard with aluminum motor seat, such as 7.5L large round pump, with 400W 60 servo, general servo motor are standard, motor shaft is 14mm, but there are exceptions, such as Panasonic servo, so in the case of self-servo, it is recommended to measure the motor shaft. Non-standard motor seat factories can also be customized.

Summary of the Magnetic gear pump problems:1. Can the standard brush motor automatically adjust the quantity?Yes, the customer just has the governor. There are brush motor has 2 lines and 5 lines, generally with 2 lines, the requirements of 5 lines to put forward first.2. How is the accuracy of the standard brush motor?rush motor accuracy of 1%

How much W servo is the gear pump with 3. 0.3ml / rev?

The 200w60 servo motor is enough. Either 200w or 400w.

4. How much distance can the gear pump take?

The height of 1 meter, before the use of the pump, it is recommended to put the material wetting, to self-absorb the thick material, it is recommended to use a square pump.

5. Is 1L enough for the factory test?

1L is not enough, and 2L is stable, because the test needs to absorb a section of pipe, especially in the case of not enough thick material, it is easy to pump air to affect the measurement accuracy.

6. How is the metering accuracy of your gear pump?

We promise the accuracy of the servo motor. However, there is customer feedback that the accuracy of our gear pump reaches one in a thousand, and the assembly line achieves two per thousand. This is different from the coordination of materials, filling speed and machines.

7. Why is the servo motor 60 pump only 45L per minute and the 90 pump only 78L per minute?

This is because at that time, the model design was designed according to the brush motor, the brush motor speed is 6000rpm, the brushless motor is 4000rpm, and the servo motor speed is only 3000rpm, so the flow of the brushless motor and servo motor will be lower than the brush motor.

8. Why is the pump body 316L and the gear using high strength engineering material PEEK instead of stainless steel?

The friction between stainless steel and stainless steel, will be greater than the friction between stainless steel and plastic, metal and metal, easy to have iron filings. The intensity of PEEK is fully sufficient.

9. Can the gear pump be removed by itself?

tolerable.

10.120L How much interface is the pump equipped with?

φ 50.5 cartridge interface.

11. Our raw materials have some weak acid and weak alkali, relatively weak. Cleaning is with toluene. Will this react with PEEK gear?

Don't react, the toluene is fine.

12.120L Pump, what is the minimum filling volume?

100ml

13. Need to understand the installation size of the gear pump?

We can provide the size installation diagram and 3D model diagram in advance, 14.0.6mll/rev,0.9ml/rev gear pump, can you match the servo motor? How much is the servo? Can there be cheaper servo brands that can work?

Can be equipped with 60 servo times, 200w, filling is enough, better can be matched with Huichuan. Have servo motor supply channels can match by themselves.

15. Can I match the servo motor and the motor installation seat?

Our products are equipped with aluminum (motor mounting), servo motors are standard mounting. Other types of motor should inform us that we can customize the motor mounting seat as required.

16. Do you have a credit jie 400W servo motor, including a servo driver?

Contains the servo drive, including the 3-meter wire.

17. What motor can be used with PLC control?

Stepper motor brushless motor servo motor can do it. Step Plc pulse type. But there is no brush motor, only with the governor.

18. Can your gear pump work for cooking oil?

Edible oil is no problem, we use a lot of here, self-priming or hopper can be, self-priming height is 1 meter, before use, it is best to let the edible oil wet the pump.

Is your gear pump of the food grade?

Yes, there are certification reports, double C certification.

20. What are your bearings for your gear pump?

Our gear pump does not use bearings, we are magnetic link, external magnetic steel and motor connected, internal magnetic steel drives the gear rotation, external magnetic ring rotation drives the internal magnetic steel rotation, so the material is completely closed without leakage, can be used for toxic, flammable and explosive materials, of course, flammable and explosive materials must be equipped with explosion-proof motor.

21.0.6ml/rev This gear pump, with more strides into the motor?

57 or 42 step motor, self-equipped motor needs to customize the motor installation seat, the first time to send the motor to customize the motor installation seat.

22. For example, filling eight heads with stepper motor requires eight pulse output,

Is there this simple and cheap pulse module?

We have a TST 42-40P integrated closed-loop step, and the drive is integrated with the stepper motor.

23. We used to use other brands of gear pumps to fill aromatics, but it will not take long before the problem of inaccurate measurement appears?

After heating, the aromatic idity is good but the cooling material will solidify should be the solidified material broken gear, resulting in insufficient suction force and inaccurate measurement. It is necessary to ensure that the whole pump filling is hot, and the pump body can be placed in the heated solution in the machine design.

24. Can honey use your gear pump? Honey can be, but not a crystal honey.

25.3.0ml/rev How big is the outlet of the gear pump?

Pagoda joint D20, chuck joint 50.5

26. Fill 30 grams of honey, 50 times per minute, which type of gear pump? Honey viscosity is large, it is recommended to match a 18L square pump.

27. Do you have brushless motor, need 485 communication can do it, can be equipped with 3 meter wire?

Yes, we are equipped with a communication motor, including the drive, the standard line is 1.4 meters, can be fixed with 3 meters long plus line.

28. What brands are your matching servo motors?

Huichuan, Xinjie, The Times can choose, you can also match by yourself.

Can the toilet washing detergent use your 316L gear pump?

No, strong corrosion, especially strong acid will react with 316L, can not use stainless steel material, we will later produce a new corrosion resistant gear pump.

30. Can you have a stepping motor? What style is it? Yes, the motor drive is integrated, the pulse control, the standard line is 30cm, the picture is as follows

31. Can your gear pump high-temperature materials be used?

Yes, the company's gear pump can adapt to 0-120 C, this also thanks to the company's precision machining ability, precision size precision, advanced design ability, rich experience to ensure that in the high temperature material gear pump operation will not be stuck, 80℃ materials can be used directly, 80 C-120℃ material, need to report to the factory, after the high temperature test before the pump factory.

32. Is there a picture of a small circle pump with a 50 brush motor?

The picture mounting plate size is 82, also has the size is 60, we can provide.

32-82

33. Do you have all the brush motors in DC?

Can be customized communication, aluminum plate seat will be a little more expensive.

Fruit juice products, with fruit grains, temperature more than 90 degrees, with your gear pump can? More than 90 degrees no problem, the fruit will break or may be stuck in the pump, if there is hard particles will wear the gear. Things like orange juice are fine.

35. How much is the accuracy of square pump stepper motor?

5 parts of thousands, we generally small pump with stepper, large pump general customers with servo, but there are customers with our large pump with stepper motor, we need to customize aluminum seat, the price is actually similar to the servo.

36. What is the head of your pump gear pump?

Our pump self-priming one meter, as long as the suction feed, the problem is not big, the lift is very big, because

The gear pump is constant pressure, wet pumping has 6 meters, again high has not been tested.

37. So the 3D model is 9, and the physical outlet hole is 9?

With the chuck joint, the inlet and outlet diameter is 12.5mm

38. Gear pump is not without material idling, there is no data can not be much time empty

Turn, does it take time for our material to move from tank to pump?

Long idling will wear the gear, but the time from the tank to the pump self-suction is ok.

39.18L Square pump, which type is the servo with your times?

750w, and the SD300 series

40. Is your pump special for flammable and explosive gear pumps? The pump is the same, to be equipped with an explosion-proof motor, the motor seat to be customized.

41. We want to use the 6L round pump for explosion-proof, what kind of explosion-proof motor is equipped with, how are the parameters and accuracy?

With D27 ordinary explosion-proof motor, the pump head of 3ml / rev, ordinary explosion-proof motor is 2800 RPM,

Explosion-proof grade CT4, inverter control, accuracy is only 1%, high precision requirements, with explosion-proof brushless motor, we have with explosion-proof brushless driver (explosion-proof grade BT4 or CT4), accuracy of accuracy, drive not explosion-proof, put explosion-proof box, because to customize delivery is longer, ordinary explosion-proof motor 10 days, explosion-proof brushless motor 15 days. As for the explosion-proof servo motor, we also need to find the right factory to talk about it,because we don’t produce pumps.

Which model is your gear pump supply credit speed servo motor 750w?750W: Motor MS6H-80CS30B1-20P7-S Drive DS5L1-20P7-PTA

Want to use your gear pump filling lubricating oil, do not want to use a hopper, directly into the bucket can smoke?

Mainly depends at the viscosity, the number of lubricating oil is not the same viscosity is not the same.

44. The 3D model you give does not indicate the direction of incoming and outgoing materials. Our designers need the direction of incoming and outgoing materials for design.

This is the kind of our square pump, all of our square pumps, are in this direction.

45. With customer reaction, with other people's gear pump in use, the feed pipe has bubbles

question:

Whether it is our home or someone else's, the pump is completely closed because of the cause of the pump bubbles.

Solution: the pipe should be added clamp to prevent water leakage, which will be much better.

The pump can not be used as a valve, no one-way valve and pneumatic closed water nozzle, there will be reflux phenomenon. The pump seal must be well prepared. Feed port, or material barrel material requires no bubbles.

46. We used to use someone else's gear pump, want to order your 3L pump with a brush motor,

Our original joint is an 8. How much is your joint? Can we do what we want about it? We match the pagoda joint outer diameter 10, you can do according to your requirements of the outer diameter 8 joint, the installation size can also be done according to your original, a brush motor 2 lines or 5 lines can also come according to your requirements.

47.1.5ml/rev Pump head with a stepper motor, we use a low speed for measurement

After the test, the accuracy range of each run met the requirements, but the calculation found only

There is 1.2ml / rev, why is this? This 1.5ml / rev is the theoretical displacement, but the magnetic pump has a volume efficiency in it, the lower the speed, the volume efficiency is relatively low, so the actual flow will be lower than the theoretical value, the lower the speed, the more obvious. Generally speaking, it is the internal of the gear pump because of the gap, the fluid leakage, the speed is low when the leakage is relatively obvious. So when we calculate the selection for our customers, such as 1 LX and 20 bottles per minute, we have 60 pumps and 48L per minute. One is volume efficiency, the other is intermittent pause time, we are all doubled. If you have several filling volumes, we will calculate the maximum filling volume. In our small pump is generally small filling volume, viscosity is large and take the square pump irrigation small filling volume, square pump flow large suction force.

48. We want to use your magnetic gear pump with UV glue, the viscosity is about 3000 cps, ok?

Uv glue is also known as photosensitive adhesive, ultraviolet light curing glue, shadowless glue is a kind of adhesive that must be cured by ultraviolet light irradiation. This kind of glue is solidified by light, so it is feasible to fill with gear pump, because the light will solidify, indoor also want to avoid light as far as possible, the pipe must be opaque black pipe, the viscosity must be ingredients bucket. Stop for a day or two is nothing, long-term or dry, the machine sealing is not so good, must be cleaned, hopper, pipe, gear pump, and so on are to be cleaned, otherwise there are solidified particles and blocks, it will be broken gear. Hopper can add cleaning solvent with a pump, hit a few cycles, and then open wash. This glue with either method, such as the piston type, can also have this cleaning problem.

49. Our material viscosity is relatively large, I want to use your magnetic gear pump, is a multi-head filling, I want to use a hopper, through multiple material pipes to multiple pumps, is it feasible?

This is not good, a hopper through multiple material pipes to multiple pumps, the viscosity of the material liquidity is not very good, will lead to uneven material absorption, resulting in inaccurate measurement. It is suggested to make a rectangular material box, with the stainless steel pipe under the pump, and ensure that the material box is continuously fed.

Above is the wrong usage

The figure above is the correct usage

50.I would like to ask, with your magnetic gear pump with brush motor, different pump 60W brush motor and 225W brush motor, can use the following controller?

Answer: yes, but there is a speed board, power is different, 60w speed board with 10A, power supply with 120w, 225w speed board with 30A, power supply with 480w.(See below)

51. I want to know the feed hole size of your pump.

Size of the inlet and outlet inner hole of our pump: 18 pump (18L): 12mm; 60 pump (45L): 22mm;

30 pump (78L): 32mm; 120 pump (120L): 32mm

50-1

52. I bought your MG231XPO2D265ml with 63 brush motor. We are not familiar with the voltage and wiring and control of the motor, and want to know the configuration and requirements of relevant electronic control.

Motor is 24V, the motor power is 225W, the motor out of 2 lines, red positive and black negative. It is recommended to provide a DC power supply above 400w, and use the general control board of the filling machine, but the control board should withstand the current of 20A.as illustrated in following figure:

53. If the filling accuracy of the magnetic gear pump is provided?

1. Add glass check valve at the inlet end of the pump, and anti-drip discharge nozzle or pneumatic closed water nozzle at the outlet end.

2. The hopper or bucket is lower than the ordinary anti-drip leakage mouth to prevent the water.

3. Ensure that the pump filling interval time is the same, that is, the pipeline pressure is consistent.

4. Good air tightness of the pipeline, and no bubbles in the pipeline and in the feeding bucket.

5. The start and stop time of the pneumatic closed water nozzle is consistent with the pump start and stop time.

6. The liquid level difference of the feed barrel is less than 10cm, timely replenishment.

7. The less resistant the pipeline is, the more accurate the pump is.

54. Can making the facial mask match this magnetic gear pump? Which model should be selected?

Generally choose 0.9ml,1.2ml the pump head of each turn, with 485 communication brushless motor and drive, because to high temperature cleaning, we are generally equipped with high temperature resistant pump head. See the figure below for details